FieldOfView.java

/* Copyright 2002-2017 CS Systèmes d'Information
 * Licensed to CS Systèmes d'Information (CS) under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.
 * CS licenses this file to You under the Apache License, Version 2.0
 * (the "License"); you may not use this file except in compliance with
 * the License.  You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
package org.orekit.propagation.events;

import java.io.Serializable;
import java.util.ArrayList;
import java.util.List;

import org.hipparchus.exception.LocalizedCoreFormats;
import org.hipparchus.geometry.enclosing.EnclosingBall;
import org.hipparchus.geometry.euclidean.threed.Line;
import org.hipparchus.geometry.euclidean.threed.Rotation;
import org.hipparchus.geometry.euclidean.threed.RotationConvention;
import org.hipparchus.geometry.euclidean.threed.Vector3D;
import org.hipparchus.geometry.partitioning.Region;
import org.hipparchus.geometry.partitioning.RegionFactory;
import org.hipparchus.geometry.spherical.twod.Edge;
import org.hipparchus.geometry.spherical.twod.S2Point;
import org.hipparchus.geometry.spherical.twod.Sphere2D;
import org.hipparchus.geometry.spherical.twod.SphericalPolygonsSet;
import org.hipparchus.geometry.spherical.twod.Vertex;
import org.hipparchus.util.FastMath;
import org.hipparchus.util.MathUtils;
import org.orekit.bodies.GeodeticPoint;
import org.orekit.bodies.OneAxisEllipsoid;
import org.orekit.errors.OrekitException;
import org.orekit.errors.OrekitMessages;
import org.orekit.frames.Frame;
import org.orekit.frames.Transform;
import org.orekit.utils.SphericalPolygonsSetTransferObject;

/** Class representing a spacecraft sensor Field Of View.
 * <p>Fields Of View are zones defined on the unit sphere centered on the
 * spacecraft. They can have any shape, they can be split in several
 * non-connected patches and can have holes.</p>
 * @see org.orekit.propagation.events.FootprintOverlapDetector
 * @author Luc Maisonobe
 * @since 7.1
 */
public class FieldOfView implements Serializable {

    /** Serializable UID. */
    private static final long serialVersionUID = 20150113L;

    /** Spherical zone. */
    private final transient SphericalPolygonsSet zone;

    /** Margin to apply to the zone. */
    private final double margin;

    /** Spherical cap surrounding the zone. */
    private final transient EnclosingBall<Sphere2D, S2Point> cap;

    /** Build a new instance.
     * @param zone interior of the Field Of View, in spacecraft frame
     * @param margin angular margin to apply to the zone (if positive,
     * the Field Of View will consider points slightly outside of the
     * zone are still visible)
     */
    public FieldOfView(final SphericalPolygonsSet zone, final double margin) {
        this.zone   = zone;
        this.margin = margin;
        this.cap    = zone.getEnclosingCap();
    }

    /** Build a Field Of View with dihedral shape (i.e. rectangular shape).
     * @param center Direction of the FOV center, in spacecraft frame
     * @param axis1 FOV dihedral axis 1, in spacecraft frame
     * @param halfAperture1 FOV dihedral half aperture angle 1,
     * must be less than π/2, i.e. full dihedra must be smaller then
     * an hemisphere
     * @param axis2 FOV dihedral axis 2, in spacecraft frame
     * @param halfAperture2 FOV dihedral half aperture angle 2,
     * must be less than π/2, i.e. full dihedra must be smaller then
     * an hemisphere
     * @param margin angular margin to apply to the zone (if positive,
     * the Field Of View will consider points slightly outside of the
     * zone are still visible)
     * @exception OrekitException if half aperture is larger than π/2
     */
    public FieldOfView(final Vector3D center,
                       final Vector3D axis1, final double halfAperture1,
                       final Vector3D axis2, final double halfAperture2,
                       final double margin)
        throws OrekitException {

        // build zone
        final RegionFactory<Sphere2D> factory = new RegionFactory<Sphere2D>();
        final double tolerance = 1.0e-12 * FastMath.max(halfAperture1, halfAperture2);
        final Region<Sphere2D> dihedra1 = buildDihedra(factory, tolerance, center, axis1, halfAperture1);
        final Region<Sphere2D> dihedra2 = buildDihedra(factory, tolerance, center, axis2, halfAperture2);
        this.zone = (SphericalPolygonsSet) factory.intersection(dihedra1, dihedra2);

        this.margin = margin;
        this.cap    = zone.getEnclosingCap();

    }

    /** Build Field Of View with a regular polygon shape.
     * @param center center of the polygon (the center is in the inside part)
     * @param meridian point defining the reference meridian for middle of first edge
     * @param insideRadius distance of the edges middle points to the center
     * (the polygon vertices will therefore be farther away from the center)
     * @param n number of sides of the polygon
     * @param margin angular margin to apply to the zone (if positive,
     * the Field Of View will consider points slightly outside of the
     * zone are still visible)
     */
    public FieldOfView(final Vector3D center, final Vector3D meridian,
                       final double insideRadius, final int n, final double margin) {

        // convert the representation based on middle edge points
        // to Hipparchus convention based on vertices
        final Rotation r                = new Rotation(center, MathUtils.TWO_PI / n,
                                                       RotationConvention.VECTOR_OPERATOR);
        final Vector3D orthogonal       = Vector3D.crossProduct(Vector3D.crossProduct(center, meridian), center);
        final Vector3D firstEdgeNormal  = new Vector3D( FastMath.sin(insideRadius), center.normalize(),
                                                       -FastMath.cos(insideRadius), orthogonal.normalize());
        final Vector3D secondEdgeNormal = r.applyTo(firstEdgeNormal);
        final Vector3D vertex           = Vector3D.crossProduct(firstEdgeNormal, secondEdgeNormal);
        final double outsideRadius      = Vector3D.angle(center, vertex);
        this.zone = new SphericalPolygonsSet(center, vertex, outsideRadius, n, 1.0e-12 * insideRadius);

        this.margin = margin;

        final S2Point[] support = new S2Point[n];
        support[0] = new S2Point(vertex);
        for (int i = 1; i < n; ++i) {
            support[i] = new S2Point(r.applyTo(support[i - 1].getVector()));
        }
        this.cap = new EnclosingBall<Sphere2D, S2Point>(new S2Point(center), outsideRadius, support);

    }

    /** Build a dihedra.
     * @param factory factory for regions
     * @param tolerance tolerance below which points are considered equal
     * @param center Direction of the FOV center, in spacecraft frame
     * @param axis FOV dihedral axis, in spacecraft frame
     * @param halfAperture FOV dihedral half aperture angle,
     * must be less than π/2, i.e. full dihedra must be smaller then
     * an hemisphere
     * @return dihedra
     * @exception OrekitException if half aperture is larger than π/2
     */
    private Region<Sphere2D> buildDihedra(final RegionFactory<Sphere2D> factory,
                                          final double tolerance, final Vector3D center,
                                          final Vector3D axis, final double halfAperture)
        throws OrekitException {
        if (halfAperture > 0.5 * FastMath.PI) {
            throw new OrekitException(LocalizedCoreFormats.OUT_OF_RANGE_SIMPLE,
                                      halfAperture, 0.0, 0.5 * FastMath.PI);
        }

        final Rotation r = new Rotation(axis, halfAperture, RotationConvention.VECTOR_OPERATOR);
        final Vector3D normalCenterPlane = Vector3D.crossProduct(axis, center);
        final Vector3D normalSidePlus    = r.applyInverseTo(normalCenterPlane);
        final Vector3D normalSideMinus   = r.applyTo(normalCenterPlane.negate());

        return factory.intersection(new SphericalPolygonsSet(normalSidePlus,  tolerance),
                                    new SphericalPolygonsSet(normalSideMinus, tolerance));

    }

    /** Get the interior zone.
     * @return the interior zone
     */
    public SphericalPolygonsSet getZone() {
        return zone;
    }

    /** Get the angular margin to apply (radians).
     * @return the angular margin to apply (radians)
     */
    public double getMargin() {
        return margin;
    }

    /** Get the angular offset of target point with respect to the Field Of View Boundary.
     * <p>
     * The offset is roughly an angle with respect to the closest boundary point,
     * corrected by the margin and using some approximation far from the Field Of View.
     * It is positive if the target is outside of the Field Of view, negative inside,
     * and zero if the point is exactly on the boundary (always taking the margin
     * into account).
     * </p>
     * <p>
     * As Field Of View can have complex shapes that may require long computation,
     * when the target point can be proven to be outside of the Field Of View, a
     * faster but approximate computation is done, that underestimate the offset.
     * This approximation is only performed about 0.01 radians outside of the zone
     * and is designed to still return a positive value if the full accurate computation
     * would return a positive value. When target point is close to the zone (and
     * furthermore when it is inside the zone), the full accurate computation is
     * performed. This setup allows this offset to be used as a reliable way to
     * detect Field Of View boundary crossings, which correspond to sign changes of
     * the offset.
     * </p>
     * @param lineOfSight line of sight from the center of the Field Of View support
     * unit sphere to the target in Field Of View canonical frame
     * @return an angular offset negative if the target is visible within the Field Of
     * View and positive if it is outside of the Field Of View, including the margin
     * (note that this cannot take into account interposing bodies)
     */
    public double offsetFromBoundary(final Vector3D lineOfSight) {

        final S2Point los = new S2Point(lineOfSight);

        // for faster computation, we start using only the surrounding cap, to filter out
        // far away points (which correspond to most of the points if the Field Of View is small)
        final double crudeDistance = cap.getCenter().distance(los) - cap.getRadius();
        if (crudeDistance - margin > FastMath.max(FastMath.abs(margin), 0.01)) {
            // we know we are strictly outside of the zone,
            // use the crude distance to compute the (positive) return value
            return crudeDistance - margin;
        }

        // we are close, we need to compute carefully the exact offset;
        // we project the point to the closest zone boundary
        return zone.projectToBoundary(los).getOffset() - margin;

    }

    /** Get the footprint of the field Of View on ground.
     * <p>
     * This method assumes the Field Of View is centered on some carrier,
     * which will typically be a spacecraft or a ground station antenna.
     * The points in the footprint boundary loops are all at altitude zero
     * with respect to the ellipsoid, they correspond either to projection
     * on ground of the edges of the Field Of View, or to points on the body
     * limb if the Field Of View goes past horizon. The points on the limb
     * see the carrier origin at zero elevation. If the Field Of View is so
     * large it contains entirely the body, all points will correspond to
     * points at limb. If the Field Of View looks away from body, the
     * boundary loops will be an empty list. The points within footprint
     * the loops are sorted in trigonometric order as seen from the carrier.
     * This implies that someone traveling on ground from one point to the
     * next one will have the points visible from the carrier on his left
     * hand side, and the points not visible from the carrier on his right
     * hand side.
     * </p>
     * <p>
     * The truncation of Field Of View at limb can induce strange results
     * for complex Fields Of View. If for example a Field Of View is a
     * ring with a hole and part of the ring goes past horizon, then instead
     * of having a single loop with a C-shaped boundary, the method will
     * still return two loops truncated at the limb, one clockwise and one
     * counterclockwise, hence "closing" the C-shape twice. This behavior
     * is considered acceptable.
     * </p>
     * <p>
     * If the carrier is a spacecraft, then the {@code fovToBody} transform
     * can be computed from a {@link org.orekit.propagation.SpacecraftState}
     * as follows:
     * </p>
     * <pre>
     * Transform inertToBody = state.getFrame().getTransformTo(body.getBodyFrame(), state.getDate());
     * Transform fovToBody   = new Transform(state.getDate(),
     *                                       state.toTransform().getInverse(),
     *                                       inertToBody);
     * </pre>
     * <p>
     * If the carrier is a ground station, located using a topocentric frame
     * and managing its pointing direction using a transform between the
     * dish frame and the topocentric frame, then the {@code fovToBody} transform
     * can be computed as follows:
     * </p>
     * <pre>
     * Transform topoToBody = topocentricFrame.getTransformTo(body.getBodyFrame(), date);
     * Transform topoToDish = ...
     * Transform fovToBody  = new Transform(date,
     *                                      topoToDish.getInverse(),
     *                                      topoToBody);
     * </pre>
     * <p>
     * Only the raw zone is used, the angular margin is ignored here.
     * </p>
     * @param fovToBody transform between the frame in which the Field Of View
     * is defined and body frame.
     * @param body body surface the Field Of View will be projected on
     * @param angularStep step used for boundary loops sampling (radians)
     * @return list footprint boundary loops (there may be several independent
     * loops if the Field Of View shape is complex)
     * @throws OrekitException if some frame conversion fails or if carrier is
     * below body surface
     */
    List<List<GeodeticPoint>> getFootprint(final Transform fovToBody, final OneAxisEllipsoid body,
                                           final double angularStep)
        throws OrekitException {

        final Frame     bodyFrame = body.getBodyFrame();
        final Vector3D  position  = fovToBody.transformPosition(Vector3D.ZERO);
        final double    r         = position.getNorm();
        if (body.isInside(position)) {
            throw new OrekitException(OrekitMessages.POINT_INSIDE_ELLIPSOID);
        }

        final List<List<GeodeticPoint>> footprint = new ArrayList<List<GeodeticPoint>>();

        final List<Vertex> boundary = zone.getBoundaryLoops();
        for (final Vertex loopStart : boundary) {
            int count = 0;
            final List<GeodeticPoint> loop  = new ArrayList<GeodeticPoint>();
            boolean intersectionsFound      = false;
            for (Edge edge = loopStart.getOutgoing();
                 count == 0 || edge.getStart() != loopStart;
                 edge = edge.getEnd().getOutgoing()) {
                ++count;
                final int    n     = (int) FastMath.ceil(edge.getLength() / angularStep);
                final double delta =  edge.getLength() / n;
                for (int i = 0; i < n; ++i) {
                    final Vector3D awaySC      = new Vector3D(r, edge.getPointAt(i * delta));
                    final Vector3D awayBody    = fovToBody.transformPosition(awaySC);
                    final Line     lineOfSight = new Line(position, awayBody, 1.0e-3);
                    GeodeticPoint  gp          = body.getIntersectionPoint(lineOfSight, position,
                                                                           bodyFrame, null);
                    if (gp != null &&
                        Vector3D.dotProduct(awayBody.subtract(position),
                                            body.transform(gp).subtract(position)) < 0) {
                        // the intersection is in fact on the half-line pointing
                        // towards the back side, it is a spurious intersection
                        gp = null;
                    }

                    if (gp != null) {
                        // the line of sight does intersect the body
                        intersectionsFound = true;
                    } else {
                        // the line of sight does not intersect body
                        // we use a point on the limb
                        gp = body.transform(body.pointOnLimb(position, awayBody), bodyFrame, null);
                    }

                    // add the point in front of the list
                    // (to ensure the loop will be in trigonometric orientation)
                    loop.add(0, gp);

                }
            }

            if (intersectionsFound) {
                // at least some of the points did intersect the body,
                // this loop contributes to the footprint
                footprint.add(loop);
            }

        }

        if (footprint.isEmpty()) {
            // none of the Field Of View loops cross the body
            // either the body is outside of Field Of View, or it is fully contained
            // we check the center
            final Vector3D bodyCenter = fovToBody.getInverse().transformPosition(Vector3D.ZERO);
            if (zone.checkPoint(new S2Point(bodyCenter)) != Region.Location.OUTSIDE) {
                // the body is fully contained in the Field Of View
                // we use the full limb as the footprint
                final Vector3D x        = bodyCenter.orthogonal();
                final Vector3D y        = Vector3D.crossProduct(bodyCenter, x).normalize();
                final double   sinEta   = body.getEquatorialRadius() / r;
                final double   sinEta2  = sinEta * sinEta;
                final double   cosAlpha = (FastMath.cos(angularStep) + sinEta2 - 1) / sinEta2;
                final int      n        = (int) FastMath.ceil(MathUtils.TWO_PI / FastMath.acos(cosAlpha));
                final double   delta    = MathUtils.TWO_PI / n;
                final List<GeodeticPoint> loop = new ArrayList<GeodeticPoint>(n);
                for (int i = 0; i < n; ++i) {
                    final Vector3D outside = new Vector3D(r * FastMath.cos(i * delta), x,
                                                          r * FastMath.sin(i * delta), y);
                    loop.add(body.transform(body.pointOnLimb(position, outside), bodyFrame, null));
                }
                footprint.add(loop);
            }
        }

        return footprint;

    }

    /** Replace the instance with a data transfer object for serialization.
     * @return data transfer object that will be serialized
     */
    private Object writeReplace() {
        return new DTO(this);
    }

    /** Internal class used only for serialization. */
    private static class DTO implements Serializable {

        /** Serializable UID. */
        private static final long serialVersionUID = 20150113L;

        /** Proxy for interior zone. */
        private final SphericalPolygonsSetTransferObject zone;

        /** Angular margin. */
        private final double margin;

        /** Simple constructor.
         * @param fov instance to serialize
         */
        private DTO(final FieldOfView fov) {
            this.zone   = new SphericalPolygonsSetTransferObject(fov.zone);
            this.margin = fov.margin;
        }

        /** Replace the deserialized data transfer object with a {@link FieldOfView}.
         * @return replacement {@link FieldOfView}
         */
        private Object readResolve() {
            return new FieldOfView(zone.rebuildZone(), margin);
        }

    }

}