TimeStampedFieldAngularCoordinates.java
/* Copyright 2002-2024 CS GROUP
* Licensed to CS GROUP (CS) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* CS licenses this file to You under the Apache License, Version 2.0
* (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.orekit.utils;
import org.hipparchus.Field;
import org.hipparchus.CalculusFieldElement;
import org.hipparchus.analysis.differentiation.FieldDerivative;
import org.hipparchus.analysis.differentiation.FieldDerivativeStructure;
import org.hipparchus.geometry.euclidean.threed.FieldRotation;
import org.hipparchus.geometry.euclidean.threed.FieldVector3D;
import org.hipparchus.geometry.euclidean.threed.RotationConvention;
import org.orekit.time.AbsoluteDate;
import org.orekit.time.FieldAbsoluteDate;
import org.orekit.time.FieldTimeStamped;
import org.orekit.time.TimeStamped;
/** {@link TimeStamped time-stamped} version of {@link FieldAngularCoordinates}.
* <p>Instances of this class are guaranteed to be immutable.</p>
* @param <T> the type of the field elements
* @author Luc Maisonobe
* @since 7.0
*/
public class TimeStampedFieldAngularCoordinates<T extends CalculusFieldElement<T>>
extends FieldAngularCoordinates<T> implements FieldTimeStamped<T> {
/** The date. */
private final FieldAbsoluteDate<T> date;
/** Build the rotation that transforms a pair of pv coordinates into another pair.
* <p><em>WARNING</em>! This method requires much more stringent assumptions on
* its parameters than the similar {@link org.hipparchus.geometry.euclidean.threed.Rotation#Rotation(
* org.hipparchus.geometry.euclidean.threed.Vector3D, org.hipparchus.geometry.euclidean.threed.Vector3D,
* org.hipparchus.geometry.euclidean.threed.Vector3D, org.hipparchus.geometry.euclidean.threed.Vector3D)
* constructor} from the {@link org.hipparchus.geometry.euclidean.threed.Rotation Rotation} class.
* As far as the Rotation constructor is concerned, the {@code v₂} vector from
* the second pair can be slightly misaligned. The Rotation constructor will
* compensate for this misalignment and create a rotation that ensure {@code
* v₁ = r(u₁)} and {@code v₂ ∈ plane (r(u₁), r(u₂))}. <em>THIS IS NOT
* TRUE ANYMORE IN THIS CLASS</em>! As derivatives are involved and must be
* preserved, this constructor works <em>only</em> if the two pairs are fully
* consistent, i.e. if a rotation exists that fulfill all the requirements: {@code
* v₁ = r(u₁)}, {@code v₂ = r(u₂)}, {@code dv₁/dt = dr(u₁)/dt}, {@code dv₂/dt
* = dr(u₂)/dt}, {@code d²v₁/dt² = d²r(u₁)/dt²}, {@code d²v₂/dt² = d²r(u₂)/dt²}.</p>
* @param date coordinates date
* @param u1 first vector of the origin pair
* @param u2 second vector of the origin pair
* @param v1 desired image of u1 by the rotation
* @param v2 desired image of u2 by the rotation
* @param tolerance relative tolerance factor used to check singularities
*/
public TimeStampedFieldAngularCoordinates (final AbsoluteDate date,
final FieldPVCoordinates<T> u1, final FieldPVCoordinates<T> u2,
final FieldPVCoordinates<T> v1, final FieldPVCoordinates<T> v2,
final double tolerance) {
this(new FieldAbsoluteDate<>(u1.getPosition().getX().getField(), date),
u1, u2, v1, v2, tolerance);
}
/** Build the rotation that transforms a pair of pv coordinates into another pair.
* <p><em>WARNING</em>! This method requires much more stringent assumptions on
* its parameters than the similar {@link org.hipparchus.geometry.euclidean.threed.Rotation#Rotation(
* org.hipparchus.geometry.euclidean.threed.Vector3D, org.hipparchus.geometry.euclidean.threed.Vector3D,
* org.hipparchus.geometry.euclidean.threed.Vector3D, org.hipparchus.geometry.euclidean.threed.Vector3D)
* constructor} from the {@link org.hipparchus.geometry.euclidean.threed.Rotation Rotation} class.
* As far as the Rotation constructor is concerned, the {@code v₂} vector from
* the second pair can be slightly misaligned. The Rotation constructor will
* compensate for this misalignment and create a rotation that ensure {@code
* v₁ = r(u₁)} and {@code v₂ ∈ plane (r(u₁), r(u₂))}. <em>THIS IS NOT
* TRUE ANYMORE IN THIS CLASS</em>! As derivatives are involved and must be
* preserved, this constructor works <em>only</em> if the two pairs are fully
* consistent, i.e. if a rotation exists that fulfill all the requirements: {@code
* v₁ = r(u₁)}, {@code v₂ = r(u₂)}, {@code dv₁/dt = dr(u₁)/dt}, {@code dv₂/dt
* = dr(u₂)/dt}, {@code d²v₁/dt² = d²r(u₁)/dt²}, {@code d²v₂/dt² = d²r(u₂)/dt²}.</p>
* @param date coordinates date
* @param u1 first vector of the origin pair
* @param u2 second vector of the origin pair
* @param v1 desired image of u1 by the rotation
* @param v2 desired image of u2 by the rotation
* @param tolerance relative tolerance factor used to check singularities
*/
public TimeStampedFieldAngularCoordinates (final FieldAbsoluteDate<T> date,
final FieldPVCoordinates<T> u1, final FieldPVCoordinates<T> u2,
final FieldPVCoordinates<T> v1, final FieldPVCoordinates<T> v2,
final double tolerance) {
super(u1, u2, v1, v2, tolerance);
this.date = date;
}
/** Builds a rotation/rotation rate pair.
* @param date coordinates date
* @param rotation rotation
* @param rotationRate rotation rate Ω (rad/s)
* @param rotationAcceleration rotation acceleration dΩ/dt (rad²/s²)
*/
public TimeStampedFieldAngularCoordinates(final AbsoluteDate date,
final FieldRotation<T> rotation,
final FieldVector3D<T> rotationRate,
final FieldVector3D<T> rotationAcceleration) {
this(new FieldAbsoluteDate<>(rotation.getQ0().getField(), date),
rotation, rotationRate, rotationAcceleration);
}
/** Builds a rotation/rotation rate pair.
* @param date coordinates date
* @param rotation rotation
* @param rotationRate rotation rate Ω (rad/s)
* @param rotationAcceleration rotation acceleration dΩ/dt (rad²/s²)
*/
public TimeStampedFieldAngularCoordinates(final FieldAbsoluteDate<T> date,
final FieldRotation<T> rotation,
final FieldVector3D<T> rotationRate,
final FieldVector3D<T> rotationAcceleration) {
super(rotation, rotationRate, rotationAcceleration);
this.date = date;
}
/** Builds an instance for a regular {@link TimeStampedAngularCoordinates}.
* @param field fields to which the elements belong
* @param ac coordinates to convert
* @since 9.0
*/
public TimeStampedFieldAngularCoordinates(final Field<T> field,
final TimeStampedAngularCoordinates ac) {
this(new FieldAbsoluteDate<>(field, ac.getDate()),
new FieldRotation<>(field, ac.getRotation()),
new FieldVector3D<>(field, ac.getRotationRate()),
new FieldVector3D<>(field, ac.getRotationAcceleration()));
}
/** Builds a TimeStampedFieldAngularCoordinates from a {@link FieldRotation}<{@link FieldDerivativeStructure}>.
* <p>
* The rotation components must have time as their only derivation parameter and
* have consistent derivation orders.
* </p>
* @param date coordinates date
* @param r rotation with time-derivatives embedded within the coordinates
* @param <U> type of the derivative
* @since 9.2
*/
public <U extends FieldDerivative<T, U>> TimeStampedFieldAngularCoordinates(final FieldAbsoluteDate<T> date,
final FieldRotation<U> r) {
super(r);
this.date = date;
}
/** Revert a rotation/rotation rate pair.
* Build a pair which reverse the effect of another pair.
* @return a new pair whose effect is the reverse of the effect
* of the instance
*/
public TimeStampedFieldAngularCoordinates<T> revert() {
return new TimeStampedFieldAngularCoordinates<>(date,
getRotation().revert(),
getRotation().applyInverseTo(getRotationRate().negate()),
getRotation().applyInverseTo(getRotationAcceleration().negate()));
}
/** {@inheritDoc} */
@Override
public FieldAbsoluteDate<T> getDate() {
return date;
}
/** Get a time-shifted state.
* <p>
* The state can be slightly shifted to close dates. This shift is based on
* a simple linear model. It is <em>not</em> intended as a replacement for
* proper attitude propagation but should be sufficient for either small
* time shifts or coarse accuracy.
* </p>
* @param dt time shift in seconds
* @return a new state, shifted with respect to the instance (which is immutable)
*/
public TimeStampedFieldAngularCoordinates<T> shiftedBy(final double dt) {
return shiftedBy(getDate().getField().getZero().add(dt));
}
/** Get a time-shifted state.
* <p>
* The state can be slightly shifted to close dates. This shift is based on
* a simple linear model. It is <em>not</em> intended as a replacement for
* proper attitude propagation but should be sufficient for either small
* time shifts or coarse accuracy.
* </p>
* @param dt time shift in seconds
* @return a new state, shifted with respect to the instance (which is immutable)
*/
public TimeStampedFieldAngularCoordinates<T> shiftedBy(final T dt) {
final FieldAngularCoordinates<T> sac = super.shiftedBy(dt);
return new TimeStampedFieldAngularCoordinates<>(date.shiftedBy(dt),
sac.getRotation(), sac.getRotationRate(), sac.getRotationAcceleration());
}
/** Add an offset from the instance.
* <p>
* We consider here that the offset rotation is applied first and the
* instance is applied afterward. Note that angular coordinates do <em>not</em>
* commute under this operation, i.e. {@code a.addOffset(b)} and {@code
* b.addOffset(a)} lead to <em>different</em> results in most cases.
* </p>
* <p>
* The two methods {@link #addOffset(FieldAngularCoordinates) addOffset} and
* {@link #subtractOffset(FieldAngularCoordinates) subtractOffset} are designed
* so that round trip applications are possible. This means that both {@code
* ac1.subtractOffset(ac2).addOffset(ac2)} and {@code
* ac1.addOffset(ac2).subtractOffset(ac2)} return angular coordinates equal to ac1.
* </p>
* @param offset offset to subtract
* @return new instance, with offset subtracted
* @see #subtractOffset(FieldAngularCoordinates)
*/
public TimeStampedFieldAngularCoordinates<T> addOffset(final FieldAngularCoordinates<T> offset) {
final FieldVector3D<T> rOmega = getRotation().applyTo(offset.getRotationRate());
final FieldVector3D<T> rOmegaDot = getRotation().applyTo(offset.getRotationAcceleration());
return new TimeStampedFieldAngularCoordinates<>(date,
getRotation().compose(offset.getRotation(), RotationConvention.VECTOR_OPERATOR),
getRotationRate().add(rOmega),
new FieldVector3D<>( 1.0, getRotationAcceleration(),
1.0, rOmegaDot,
-1.0, FieldVector3D.crossProduct(getRotationRate(), rOmega)));
}
/** Subtract an offset from the instance.
* <p>
* We consider here that the offset Rotation is applied first and the
* instance is applied afterward. Note that angular coordinates do <em>not</em>
* commute under this operation, i.e. {@code a.subtractOffset(b)} and {@code
* b.subtractOffset(a)} lead to <em>different</em> results in most cases.
* </p>
* <p>
* The two methods {@link #addOffset(FieldAngularCoordinates) addOffset} and
* {@link #subtractOffset(FieldAngularCoordinates) subtractOffset} are designed
* so that round trip applications are possible. This means that both {@code
* ac1.subtractOffset(ac2).addOffset(ac2)} and {@code
* ac1.addOffset(ac2).subtractOffset(ac2)} return angular coordinates equal to ac1.
* </p>
* @param offset offset to subtract
* @return new instance, with offset subtracted
* @see #addOffset(FieldAngularCoordinates)
*/
public TimeStampedFieldAngularCoordinates<T> subtractOffset(final FieldAngularCoordinates<T> offset) {
return addOffset(offset.revert());
}
}