AbstractPropagatorBuilder.java
/* Copyright 2002-2020 CS Group
* Licensed to CS Group (CS) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* CS licenses this file to You under the Apache License, Version 2.0
* (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.orekit.propagation.conversion;
import java.util.ArrayList;
import java.util.List;
import org.hipparchus.exception.LocalizedCoreFormats;
import org.hipparchus.util.FastMath;
import org.orekit.attitudes.AttitudeProvider;
import org.orekit.attitudes.InertialProvider;
import org.orekit.errors.OrekitIllegalArgumentException;
import org.orekit.forces.gravity.NewtonianAttraction;
import org.orekit.frames.Frame;
import org.orekit.orbits.Orbit;
import org.orekit.orbits.OrbitType;
import org.orekit.orbits.PositionAngle;
import org.orekit.propagation.integration.AdditionalEquations;
import org.orekit.time.AbsoluteDate;
import org.orekit.utils.ParameterDriver;
import org.orekit.utils.ParameterDriversList;
import org.orekit.utils.ParameterDriversList.DelegatingDriver;
import org.orekit.utils.ParameterObserver;
/** Base class for propagator builders.
* @author Pascal Parraud
* @since 7.1
*/
public abstract class AbstractPropagatorBuilder implements PropagatorBuilder {
/** Central attraction scaling factor.
* <p>
* We use a power of 2 to avoid numeric noise introduction
* in the multiplications/divisions sequences.
* </p>
*/
private static final double MU_SCALE = FastMath.scalb(1.0, 32);
/** Date of the initial orbit. */
private AbsoluteDate initialOrbitDate;
/** Frame in which the orbit is propagated. */
private final Frame frame;
/** Central attraction coefficient (m³/s²). */
private double mu;
/** Drivers for orbital parameters. */
private final ParameterDriversList orbitalDrivers;
/** List of the supported parameters. */
private ParameterDriversList propagationDrivers;
/** Orbit type to use. */
private final OrbitType orbitType;
/** Position angle type to use. */
private final PositionAngle positionAngle;
/** Position scale to use for the orbital drivers. */
private final double positionScale;
/** Attitude provider for the propagator. */
private AttitudeProvider attitudeProvider;
/** Additional equations. */
private List<AdditionalEquations> additionalEquations;
/** Build a new instance.
* <p>
* The template orbit is used as a model to {@link
* #createInitialOrbit() create initial orbit}. It defines the
* inertial frame, the central attraction coefficient, the orbit type, and is also
* used together with the {@code positionScale} to convert from the {@link
* ParameterDriver#setNormalizedValue(double) normalized} parameters used by the
* callers of this builder to the real orbital parameters. The initial attitude
* provider is aligned with the inertial frame.
* </p>
* <p>
* By default, all the {@link #getOrbitalParametersDrivers() orbital parameters drivers}
* are selected, which means that if the builder is used for orbit determination or
* propagator conversion, all orbital parameters will be estimated. If only a subset
* of the orbital parameters must be estimated, caller must retrieve the orbital
* parameters by calling {@link #getOrbitalParametersDrivers()} and then call
* {@link ParameterDriver#setSelected(boolean) setSelected(false)}.
* </p>
* @param templateOrbit reference orbit from which real orbits will be built
* @param positionAngle position angle type to use
* @param positionScale scaling factor used for orbital parameters normalization
* (typically set to the expected standard deviation of the position)
* @param addDriverForCentralAttraction if true, a {@link ParameterDriver} should
* be set up for central attraction coefficient
* @since 8.0
* @see #AbstractPropagatorBuilder(Orbit, PositionAngle, double, boolean,
* AttitudeProvider)
*/
protected AbstractPropagatorBuilder(final Orbit templateOrbit, final PositionAngle positionAngle,
final double positionScale, final boolean addDriverForCentralAttraction) {
this(templateOrbit, positionAngle, positionScale, addDriverForCentralAttraction,
new InertialProvider(templateOrbit.getFrame()));
}
/** Build a new instance.
* <p>
* The template orbit is used as a model to {@link
* #createInitialOrbit() create initial orbit}. It defines the
* inertial frame, the central attraction coefficient, the orbit type, and is also
* used together with the {@code positionScale} to convert from the {@link
* ParameterDriver#setNormalizedValue(double) normalized} parameters used by the
* callers of this builder to the real orbital parameters.
* </p>
* <p>
* By default, all the {@link #getOrbitalParametersDrivers() orbital parameters drivers}
* are selected, which means that if the builder is used for orbit determination or
* propagator conversion, all orbital parameters will be estimated. If only a subset
* of the orbital parameters must be estimated, caller must retrieve the orbital
* parameters by calling {@link #getOrbitalParametersDrivers()} and then call
* {@link ParameterDriver#setSelected(boolean) setSelected(false)}.
* </p>
* @param templateOrbit reference orbit from which real orbits will be built
* @param positionAngle position angle type to use
* @param positionScale scaling factor used for orbital parameters normalization
* (typically set to the expected standard deviation of the position)
* @param addDriverForCentralAttraction if true, a {@link ParameterDriver} should
* be set up for central attraction coefficient
* @param attitudeProvider for the propagator.
* @since 10.1
* @see #AbstractPropagatorBuilder(Orbit, PositionAngle, double, boolean)
*/
protected AbstractPropagatorBuilder(final Orbit templateOrbit,
final PositionAngle positionAngle,
final double positionScale,
final boolean addDriverForCentralAttraction,
final AttitudeProvider attitudeProvider) {
this.initialOrbitDate = templateOrbit.getDate();
this.frame = templateOrbit.getFrame();
this.mu = templateOrbit.getMu();
this.propagationDrivers = new ParameterDriversList();
this.orbitType = templateOrbit.getType();
this.positionAngle = positionAngle;
this.positionScale = positionScale;
this.orbitalDrivers = orbitType.getDrivers(positionScale, templateOrbit, positionAngle);
this.attitudeProvider = attitudeProvider;
for (final DelegatingDriver driver : orbitalDrivers.getDrivers()) {
driver.setSelected(true);
}
this.additionalEquations = new ArrayList<AdditionalEquations>();
if (addDriverForCentralAttraction) {
final ParameterDriver muDriver = new ParameterDriver(NewtonianAttraction.CENTRAL_ATTRACTION_COEFFICIENT,
mu, MU_SCALE, 0, Double.POSITIVE_INFINITY);
muDriver.addObserver(new ParameterObserver() {
/** {@inheridDoc} */
@Override
public void valueChanged(final double previousValue, final ParameterDriver driver) {
AbstractPropagatorBuilder.this.mu = driver.getValue();
}
});
propagationDrivers.add(muDriver);
}
}
/** {@inheritDoc} */
public OrbitType getOrbitType() {
return orbitType;
}
/** {@inheritDoc} */
public PositionAngle getPositionAngle() {
return positionAngle;
}
/** {@inheritDoc} */
public AbsoluteDate getInitialOrbitDate() {
return initialOrbitDate;
}
/** {@inheritDoc} */
public Frame getFrame() {
return frame;
}
/** {@inheritDoc} */
public ParameterDriversList getOrbitalParametersDrivers() {
return orbitalDrivers;
}
/** {@inheritDoc} */
public ParameterDriversList getPropagationParametersDrivers() {
return propagationDrivers;
}
/**
* Get the attitude provider.
*
* @return the attitude provider
* @since 10.1
*/
public AttitudeProvider getAttitudeProvider() {
return attitudeProvider;
}
/**
* Set the attitude provider.
*
* @param attitudeProvider attitude provider
* @since 10.1
*/
public void setAttitudeProvider(final AttitudeProvider attitudeProvider) {
this.attitudeProvider = attitudeProvider;
}
/** Get the position scale.
* @return the position scale used to scale the orbital drivers
*/
public double getPositionScale() {
return positionScale;
}
/** Get the central attraction coefficient (µ - m³/s²) value.
* @return the central attraction coefficient (µ - m³/s²) value
* @since 9.2
*/
public double getMu() {
return mu;
}
/** Get the number of selected parameters.
* @return number of selected parameters
*/
private int getNbSelected() {
int count = 0;
// count orbital parameters
for (final ParameterDriver driver : orbitalDrivers.getDrivers()) {
if (driver.isSelected()) {
++count;
}
}
// count propagation parameters
for (final ParameterDriver driver : propagationDrivers.getDrivers()) {
if (driver.isSelected()) {
++count;
}
}
return count;
}
/** {@inheritDoc} */
public double[] getSelectedNormalizedParameters() {
// allocate array
final double[] selected = new double[getNbSelected()];
// fill data
int index = 0;
for (final ParameterDriver driver : orbitalDrivers.getDrivers()) {
if (driver.isSelected()) {
selected[index++] = driver.getNormalizedValue();
}
}
for (final ParameterDriver driver : propagationDrivers.getDrivers()) {
if (driver.isSelected()) {
selected[index++] = driver.getNormalizedValue();
}
}
return selected;
}
/** Build an initial orbit using the current selected parameters.
* <p>
* This method is a stripped down version of {@link #buildPropagator(double[])}
* that only builds the initial orbit and not the full propagator.
* </p>
* @return an initial orbit
* @since 8.0
*/
protected Orbit createInitialOrbit() {
final double[] unNormalized = new double[orbitalDrivers.getNbParams()];
for (int i = 0; i < unNormalized.length; ++i) {
unNormalized[i] = orbitalDrivers.getDrivers().get(i).getValue();
}
return getOrbitType().mapArrayToOrbit(unNormalized, null, positionAngle, initialOrbitDate, mu, frame);
}
/** Set the selected parameters.
* @param normalizedParameters normalized values for the selected parameters
*/
protected void setParameters(final double[] normalizedParameters) {
if (normalizedParameters.length != getNbSelected()) {
throw new OrekitIllegalArgumentException(LocalizedCoreFormats.DIMENSIONS_MISMATCH,
normalizedParameters.length,
getNbSelected());
}
int index = 0;
// manage orbital parameters
for (final ParameterDriver driver : orbitalDrivers.getDrivers()) {
if (driver.isSelected()) {
driver.setNormalizedValue(normalizedParameters[index++]);
}
}
// manage propagation parameters
for (final ParameterDriver driver : propagationDrivers.getDrivers()) {
if (driver.isSelected()) {
driver.setNormalizedValue(normalizedParameters[index++]);
}
}
}
/** Add a supported parameter.
* @param driver driver for the parameter
*/
protected void addSupportedParameter(final ParameterDriver driver) {
propagationDrivers.add(driver);
propagationDrivers.sort();
}
/** Reset the orbit in the propagator builder.
* @param newOrbit New orbit to set in the propagator builder
*/
public void resetOrbit(final Orbit newOrbit) {
// Map the new orbit in an array of double
final double[] orbitArray = new double[6];
orbitType.mapOrbitToArray(newOrbit, getPositionAngle(), orbitArray, null);
// Update all the orbital drivers, selected or unselected
// Reset values and reference values
final List<DelegatingDriver> orbitalDriversList = getOrbitalParametersDrivers().getDrivers();
int i = 0;
for (DelegatingDriver driver : orbitalDriversList) {
driver.setReferenceValue(orbitArray[i]);
driver.setValue(orbitArray[i++]);
}
// Change the initial orbit date in the builder
this.initialOrbitDate = newOrbit.getDate();
}
/** Add a set of user-specified equations to be integrated along with the orbit propagation (author Shiva Iyer).
* @param additional additional equations
* @since 10.1
*/
public void addAdditionalEquations(final AdditionalEquations additional) {
additionalEquations.add(additional);
}
/** Get the list of additional equations.
* @return the list of additional equations
* @since 10.1
*/
protected List<AdditionalEquations> getAdditionalEquations() {
return additionalEquations;
}
}