Re: [Orekit Users] Issue with EventState/Propagator/Elevation Detector - HELP!!

[<schatzman-james@n-ask.com>]

Thanks for your help.

Now that I straightened out my understanding of how the software works, I
fixed my original problem, but I found two difficulties:

1)  If elevation>threshold at the end of the propagation interval, then an
event is generated when the elevation rises above the threshold but not at the
end of the propagation interval. I dealt with that easily enough by looking
for an unmatched "rise" event after the propagation.

2) A harder problem occurs when the elevation is above the threshold at the
start of a propagation. Then no event is generated at the beginning nor when
then elevation falls below the threshold. There is no trace in the event
history that the satellite was ever above the elevation threshold.

3) A further complication occurs when you propagate over an interval where the
satellite is always above the elevation threshold relative to the ground
point. No events are generated.

I am thinking about how to deal with #2. Fixing that will probably also fix
#3. Looking at the code, it is not obvious to me how to do it. Simply
generating an event at the initial time if the elevation is above the
threshold is insufficient, because the internal logic suppresses any event
when the elevation falls below the threshold.

Any ideas?

Thanks!